Teflon Encapsulated Gaskets for Cam and Groove Couplers
Gaskets resistant to chemical attack:
Teflon® Encapsulated Silicone and Viton CAM LOCKING GASKETS: M-Cor Inc. Encapsulated Cam and Groove coupler gaskets are used to replace standard Viton , Buna or Epdm gaskets when cam and groove couplers are used in demanding applications.
FEATURES:
1. High chemical resistance.
2. Wide temperature range: -60C to +205C.
3. Low coefficient of friction .1 to .2 : nonstick surface.
4. Sanitary: Eliminates contamination. Sterilizable ,FDA Compliant and USP CLASS VI compliant encapsulation. *See Compliances. Part 177 of 21 FDA Regulation.
5. Low compression set.
These are the benefits of utilizing an encapsulated gasket:
1. Eliminates Premature Seal Failure: Due to the Teflon encapsulation, the Encap-O-Lock gasket resists chemical attack.
2. Leak Free Service: A core energizer of either silicone or fluoroelastomer provides a continuous intensive contact with the sealing surfaces. An elastomer core energizer eliminates cold flow of Teflon.
3. Non-Stick Surface: Low coefficient of friction provides anti-adhesion properties for easy clean up and
installation.
4. Sterilizable: For use in food processing and pharmaceutical industries.
Encapsulated Cam Lock Coupler Gasket Standard Sizing:*
| M-Cor Part # | Actual Size O.D. Inches | Actual Size I.D. Inches | Height | Nominal Size Inches |
| ENC-750 | 1.375 | .875 | .218 | 3/4 |
| ENC-1000 | 1.563 | 1.063 | .250 | 1.0 |
| ENC-1250 | 1.938 | 1.359 | .250 | 1 1/4 |
| ENC-1500 | 2.188 | 1.625 | .250 | 1 1/2 |
| ENC-2000 | 2.625 | 2.000 | .250 | 2.0 |
| ENC-2500 | 3.125 | 2.375 | .250 | 2 1/2 |
| ENC-3000 | 3.719 | 3.000 | .250 | 3.0 |
| ENC-4000 | 4.875 | 4.000 | .250 | 4.0 |
*Custom sizes available upon request.
